Cadillac Lyriq Owner Manual (GMNA-Localizing-U.S./Canada-15644413) -
2023 - CRC - 7/28/22
230
Driving and Operating
5. Plug in the AC charge cord into the
vehicle charge port. Make sure the AC
vehicle plug is fully connected to the AC
charge port. If it is not properly
connected, the vehicle may not be
charged.
6. Verify that the charge status light turns
on and an audible chirp occurs. See
.
To End AC Charging
1. Unlock the charge cord from the vehicle
by pressing the button on the top of the
charge cord plug. Unplug the charge cord
from the vehicle. The charge port door
will automatically close when the charge
cord is unplugged.
2. Press the button to manually close the
charge port door.
3. Unplug the charge cord from the
electrical outlet.
4. Place the charge cord into the storage
compartment.
DC Charging
DC Charging Station Hardware
The vehicle can be charged using DC
charging equipment typically found at
service stations and other public locations.
Check the charging station DC vehicle
plug for compatibility with the DC
charge port on this vehicle. This
vehicle is compatible with a
Combined Charging System 1 (CCS1)
connector.
When recharging at a DC charge station, the
charging cable connected to the vehicle
must be less than 10 m (33 ft) in length to
meet functionality and regulatory
requirements.
{
Warning
Do not use the charging station if the
handle has defects such as cracks,
exposed wires, burnt or missing pins, or
any other damage. A damaged handle
may result in personal injury and/or
damage to the vehicle, the charging port
or other property.
For maximum charging performance, and to
prevent charging interruptions or damage to
the high voltage battery and vehicle:
.
Remove your hands from the charging
handle once it has been plugged in. If not
done, this can cause a charging
interruption.
.
Ensure that the charge cord plug clicks.
