Cadillac Lyriq Owner Manual (GMNA-Localizing-U.S./Canada-15644413) -
2023 - CRC - 7/28/22
Driving and Operating
185
.
ACC is holding the vehicle at a stop and
there is another vehicle directly ahead,
pressing RES+ will increase the set speed.
.
and when pressing RES+ there is no
longer a vehicle ahead or the vehicle
ahead is pulling away and the brake is
not applied with cause the ACC to
resume.
When it is determined that there is no
vehicle ahead or the vehicle ahead is beyond
the selected following gap, then the vehicle
speed will increase to the set speed.
Reducing Speed While ACC Is at a Set Speed
If ACC is already activated, do one of the
following:
.
Use the brake to get to the desired lower
speed. Release the brake and press SET
–
.
The vehicle will now cruise at the lower
speed.
.
Press and hold SET
–
until the desired
lower speed is reached, then release it.
.
To decrease speed in smaller increments,
press SET
−
to the first detent. For each
press, the vehicle goes about 1 km/h or
(1 mph) slower.
.
To decrease speed in larger increments,
press SET
−
to the second detent. For each
press, the vehicle speed decreases to the
next 5 km/h (5 mph) mark on the
speedometer.
The set speed can also be decreased while
the vehicle is stopped.
If stopped with the brake applied, press or
hold SET
−
until the desired set speed is
displayed.
Selecting the Follow Distance Gap
When a slower moving vehicle is detected
ahead within the selected following gap,
ACC will adjust the vehicle's speed and
attempt to maintain the follow distance gap
selected.
Press
[
on the steering wheel to adjust
the following gap. Each press cycles the gap
button through three settings: Far, Medium,
or Near.
When pressed, the current gap setting
displays briefly on the instrument cluster.
The gap setting will be maintained until it is
changed.
Far Gap Setting
Medium Gap Setting
