Cadillac LYRIQ 2023, Руководство пользователя

Страница: 114 / 337

Cadillac Lyriq Owner Manual (GMNA-Localizing-U.S./Canada-15644413) -
2023 - CRC - 7/28/22
112 Instruments and Controls
Programming the Universal Remote
System
Programming involves time-sensitive actions
and may time out, requiring the procedure
to be repeated. Read these instructions
completely before programming the
Universal Remote system. It may help to
have another person assist with the
programming process.
1. On the infotainment home screen,
navigate to the Universal Remote
controls.
2. Hold the end of the hand-held
transmitter about 3 to 8 cm (1 to 3 in)
away from the rear-view mirror. The
hand-held transmitter was supplied by
the manufacturer of the garage door
opener.
3. Select the “ Add Remotes ” option on the
infotainment screen.
4. Press and hold the hand-held transmitter
button. Do not release the hand-held
transmitter button until
“ Signal Found ”
appears on the infotainment screen.
5. Once the signal is found, test the
Universal Remote System by pressing the
Test button. If your garage door moves,
then programming was successful. You
may need to press the Test button
several times. Indicate the successful
programming of a remote by pressing
the It Worked button. After successfully
programming a remote, there is no need
to complete Steps 6
– 10.
6. If your garage door does not react
during testing, press the It Didn ’ t Work
button and proceed to Step 7.
The following steps require the location
and pressing of the Learn or Smart
button on the garage door opener
receiver inside the garage. These steps
may require a ladder and are time
sensitive.
7. Locate the Learn or Smart button on the
garage door opener receiver in the
garage. The name and color may vary by
manufacturer but is usually located near
the antenna wire.
8. Press and release the Learn or Smart
button on the garage door opener
receiver. Step 9 must be completed
within 30 seconds of pressing this
button.
9. Press the Test button on the
infotainment screen. If your garage door
moves, then programming was
successful. You may need to press the
Test button several times. Indicate
successful programming by pressing the
It Worked button.
10. If programming is not successful, press
It Didn ’ t Work button and repeat
Steps 8 – 9, or consult HomeLink by
website or phone.
After your Universal Remote has been
successfully programmed, you can change
the name of the remote on the screen as
desired.
Some garage door openers require a
modification of Step 4. See
“ Radio Signals
for Some Gate Operators. ”
For questions or programming help, visit
www.homelink.com/gm for self-help videos
or call 1
– 800 – 355 – 3515. For calls placed
outside the U.S., Canada, or Puerto Rico,
international rates will apply and may differ
based on landline or mobile phone.
Erasing Universal Remotes
To erase a programmed Universal Remote,
select the remote on the infotainment
screen. Then select
“ Delete. ”