CAB THARO Apollo Series, Руководство оператора

Страница: 92 / 139

92 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
Internal Rewinder M
This option is available for Apollo 3 only.
Apollo 3/200M and Apollo 3/300M are designed in that manner that the
internal rewinder can be added by the operator in necessary.
Using the internal rewinder and the rewind guide plate or the present sensor
the printer may be operated in the rewind or peel-off mode.
Safety Precaution
WARNING !
Unplug power cord before mounting the internal rewinder !
Preparing the printer
• Loosen the screws (2) and remove the lid (1).
1 2
Fig. 13 h Dismounting the lid
Mounting the internal rewinder
The internal rewinder will be fixed at the mounting plate of the printer with three
screws.
1. Rotate the rewind hub (9) and the rewind plate (8) in relation to the flange
(7), so that one of the holes in the flange is accessible.
2. Push the rewinder assembly into the opening (5). To make sure that the
gearwheel (6) snaps into the gear (4) it is recommended to turn a little the
rewinder during inserting. Push the assembly further into the printer until
the flange (7) fits tightly the mounting plate.