CAB THARO Apollo Series, Руководство оператора

Страница: 119 / 139

B-3 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
Interface Cable for RS-422/ RS-485
To control the Apollo by RS-422/ RS-485 interface, only the signals TDATA+,
TDATA-, RDATA+, and RDATA- are necessary.
Check the pin assignment of the interface of your computer, and use the pin
assignment of the printer as shown in Table B-1 to obtain a suitable cable.
The pins of TDATA+ and RDATA+ and the pins of TDATA- und RDATA- have
to be connected with ea ch other. For long transmission distances it is
recommanded to terminate the lines.
9 pin connector 25 pin plug
Fig. B-5 Interface cable with 9 pin computer connector
for RS-232 with protocol "RTS/CTS" or "XON/XOFF"
25 pin connector 25 pin plug
Fig. B-4 Interface cable with 25 pin computer connector
for RS-232 with protocol " RTS/CTS" or "XON/XOFF"
PC Apollo
1 1
2 3
3 2
4 5
5 4
7 7
6
8
20
PC Apollo
2 2
3 3
5 7
7 5
8 4
1
4
6