CAB THARO Apollo Series, Руководство оператора

Страница: 87 / 139

87 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
CAUTION !
If you have switched the operating voltage of your rewinder you need to
replace the fuses. For the standard setting of 230V, two fuses rated at
500mAT must be used. For operation at 115V, two fuses rated at 1AT must
be used. (Both types of fuses are shipped with the rewinder, one of
which is installed depending on the voltage setting.)
To alter the voltage, open the cover (3) and remove the voltage selector.
Replace the fuses as explained above. Slide the voltage selector back into the
power supply module so that the correct voltage is visible in the lid window.
Connect the rewinder to a grounded outlet using the power cable supplied in
the accessories package.
Connecting the Rewinder to the Power Supply
The rewinder operates with a supply voltage of 230V/ 50Hz or 115V/ 60Hz.
CAUTION !
Before connecting the rewinder to the power supply, make sure that the
voltage selected on the power supply module is the same as your main
power supply !
Fig. 13 c Power supply module of the external rewinder
1 - Power supply
connector
2 - Power switch
3 - Voltage selector cover
The current voltage setting of the power module is visible in the lid window (3).
1 2 3