CAB THARO Apollo Series, Руководство оператора

Страница: 102 / 139

102 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
Formatting the Memory Card
For operation, the memory card first has to be structured internally in a certain
way. Normally, memory cards are already pre-formatted in a suitable manner.
If the card you are using is not formatted at all, the Apollo will bring up one of
the messages "Unknown card" or "Structural err." Then, you may format the
card using one of the following methods :
1. Formatting the card using the Apollo setup command "Format card".
(see Chapter 9)
2. Formatting the card using the Apollo's interface and the printer command
"Mf;name CR".
Writing on the Memory Card
There are also different methods to write onto a memory card.
The easiest way is to copy label formats, graphics, or font files directly onto the
card using a PC card drive of a lap-top or another computer and the DOS
command "COPY".
Another way is to write on the card using the card drive of the Apollo and
transfer the data via interface.
For saving a label, you need to put the label design commands into "brackets"
consisting of "Ms"-commands :
Ms LBL;ABC Command to save a file called "ABC"
J |
H 100,0,T |
S l1;0,0,68,71,108 | Contents of the file "ABC"
T 10,10,0,3,pt15;Memory card |
A 1[NOPRINT] |
Ms LBL End of Save File command
After completing the commands the file "ABC" is stored on the card with all
commands from "J" to "A" which describe the label format.
The parameter [NOPRINT] used within the command A line will suppress the print
of the label while saving the file.
Whenever the file "ABC" is called up, exactly one label will be printed.
If you want to print the label in a variable quantity do not use the A command
within the label description.