CAB THARO Apollo Series, Руководство оператора

Страница: 34 / 139

34 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
6 Media Loading
Loading Labels
Fig. 6 a Media Loading Apollo 1
1. Lift the printhead by rotating the lever (1) clockwise until it stops.
NOTICE !
With Apollo 1, the printhead lever (1) has to be rotated by approximately
260°. Only if the swing movement has been completed will the upper
pinch roller (10) be removed from the lower pinch roller (11), and the
entire area is opened for loading the media.
2. Loosen the media retainer knurled screw (5) and swing the media retainer
(4) upwards.
3. Place the label roll (2) onto the media hub (3).
The solid line represents the feed path of outside-rolled labels, the broken
line of inside-rolled labels. The broken-dotted line shows the media path of
fanfold paper (6). For printers with internal rewinder, pay special
attention that the media is properly fed above the internal rewind hub (7)
when loading.
1 2 3 4 5
6 7 8 9 10 11