CAB THARO Apollo Series, Руководство оператора

Страница: 16 / 139

16 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
Optional Features
External Media Rewinder
For rewinding large print jobs, an external rewinder is available to handle an
entire label roll. Please note, that for an external rewinder, the maximum size
of the supply roll is limited to 8 in (200 mm) with a core diameter of 3 in (75
mm), or a supply roll may be up to 7.5 in (190 mm) with a core diameter of 1.6
in (40 mm).
The external rewinder is mechanically linked to the Apollo by an adapter plate,
but works independently through its own power supply. Consequently, the
rewinder requires its own separate outlet for operation.
Cutter Assembly
With the optional cutter unit, labels or continuous media (up to 180 g/sqm) may
be cut immediately after printing. You can choose whenever you want to cut,
whether you cut off the individually, after a pre-selected quantity of labels have
been printed, or only at the end of a print job.
The cutter is powered and controlled directly by the peripheral connector of the
Apollo.
For cutter operation, the firmware of the Apollo will automatically backfeed the
label, so that after cutting, the label roll will be repositioned for the print of the
next label.
Internal Rewinder M
Apollo 3/200M and Apollo 3/300M are designed in that manner that an
internal rewinder may be added by the operator if necessary. Using the internal
rewinder and the rewind guide plate or the present sensor the printer may be
operated in the rewind or peel-off mode.
Rewind Guide Plate (for Apollo with internal rewinder only)
The rewind guide plate for rewinding the silicon liner, offers to rewind small print
jobs internally. The maximum rewind diameter greatly depends on the size of
the remaining media roll and is also limited by the location of the ribbon supply
roll as well as the ribbon take up.
Present sensor (for Apollo with internal rewinder only)
This option allows for on-demand labelling. The present sensor consists of the
tear-off plate and the sensor itself. The sensor, which is attached to the Apollo
by the peripheral connector, indicates the presence of a label, and pauses the
printing process until the label is removed.