CAB THARO Apollo Series, Руководство оператора

Страница: 100 / 139

100 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
Memory Cards
The printers of the Apollo series provide an option for using memory cards to
permanently save graphics, fonts, complete label formats, or database
information. Data transfer may be performed via interface. Alternatively, the
printer is able to read from cards which has been written on in PC card drives
of lap-tops or other computers, etc.
The Apollo is able to read from PCMCIA version 2.1 compatible sRAM cards
or Flash-EPROM cards. The maximum memory capacity for Apollo 1/2 is 4
MegaByte, and for Apollo 3 16 MegaByte.
It is recommended that you make backup copies in case of malfunction of the
original cards.
Preparing the Memory Card
Fig. 13 s Write protection/ Inserting the battery
The write protection of the card may be activated or deactivated by shifting the
switch (1) located at the front side of the card. The interpretation of the setting
may be read from an imprint (3) on the back of the card.
If you want to format the card or write on it, switch off the write protection.
In case the battery has to be replaced, it is usually found in a slot (2) above the
switch (1).
For replacing or inserting the battery in sRAM cards refer to the instructions of
the manufacturer.
1 2 3