CAB THARO Apollo Series, Руководство оператора

Страница: 126 / 139

C-4 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
Error message
File not found
FPGA
malfunction
Head error
Head open *
Head too hot *
Invalid data
Invalid outline
Invalid setup
LCD malfunction
Memory overflow
Solution
Check the contents of the card.
Switch printer off and then on.
If error recurs
→
contact Service.
Switch printer off and then on.
If error recurs
→
contact Service.
Lock printhead.
After pausing to cool down the
printhead, the print job will be
continued automatically.
If the fault recurs repeatedly, reduce
the heat level or the print speed via
the software.
Cancel current print job.
Check data.
Cancel current print job.
Change font.
Use RESTORE function to reset all
settings back to factory settings.
Configure setup. (see Chapter 9)
If error recurs
→
contact Service.
Switch printer off and then on.
If error recurs
→
contact Service.
Cancel current print job.
Reduce amount of information.
Possible cause
Requested file is not on the card
Hardware error
Hardware error
Printhead is not properly locked
(Apollo 1 only)
Printhead is overheated due to
labels containing a lot of graphics,
text, bar codes, etc.
Fault while downloading graphic
data
Error with the selected font
(download font)
Setup is invalid
Hardware error
Current print job contains too much
information
(selected fonts, large graphics)
Table C-3 Error messages (continuation)