BYD ATTO 3 2022, Руководство пользователя

Страница: 86 / 201

85
USING AND DRIVING
05
WARNING
•
Do not modify, disassemble, or repair
the charging equipment and related
ports.
•
It is not recommended to use
any additional wire or adapter/
connector. If an additional adapter is
really needed, select a suitable wire
diameter (≥1.5 flat wire), and the
adapter/connector parameters must
meet the requirements.
• Never use the charging equipment
if the household power supply strip
cable becomes soft, the charging
connector cable is worn out, the
insulation layer is cracked, or in case
of any other damage.
• Never use the equipment when the
charging connector, power plug, or
power supply strip is disconnected,
broken, or any sign of surface
damage.
•
In order to prevent port hatch wear,
do not repeatedly open and close it.
1. Charging 1. Charging
• Power off the vehicle.
• With the doors unlocked, press the
charging port hatch to open.
• Open the hatch and remove the
port cover. Make sure the port in not
obstructed in any way.
• Insert the Mode 2 plug into the
household socket.
• Insert the charging coupler into the
charging port.
• The connecting indicator on the
instrument cluster or infotainment
system lights up.
CAUTION
•Do not forcibly insert the charging
connector when the electric lock is
engaged.
•Charging parameters and changes
will be displayed on the cluster while
charging is taking place.
•At this point, scheduled charging
can be set up through Infotainment
→ 'New Energy' → 'Charge Settings'
interface.
•The instrument cluster indicates
the estimated remaining time to full
charge while charging is taking place.
Depending on temperature, SOC, and
charging facilities, the remaining time
to full charge may vary slightly.
•When the battery is low, the scheduled
charging function cannot be used.