BYD ATTO 3 2022 Скачать руководство пользователя страница 155

Страница: 155 / 201

154

Maintenance

Information

Maintenance Cycle and

Contents

Vehicle Maintenance Plan

• The maintenance plan is designed to

ensure stable driving, failure reduction,

safe and economical driving.

• Drivers can refer to the maintenance

plan for scheduled maintenance

intervals, depending on the odometer

reading or time interval, whichever

comes first.

• For overdue maintenance items, the

same time interval should be used for

maintenance.

• Rubber hoses (for A/C and heating

systems, braking systems, etc.) should

be checked by professional technicians

according to the maintenance schedule.

• These are particularly important

maintenance items whose maintenance

intervals are recorded in the

maintenance schedule. Hoses with

any degradation or damage should be

replaced immediately.

• The maintenance schedule lists all the

maintenance items that are necessary to

keep the vehicle in optimum condition

at all times.

• It is recommended that the maintenance

be performed in accordance with the

standards and specifications of BYD Auto

Co., Ltd., and by a local BYD authorized

dealer or service provider.

• The maintenance schedule lists the

maintenance items and travel time or

distance based on the assumption that

the vehicle is used as a normal means of

transportation to carry passengers and

goods that do not exceed the vehicle

load limit.

CAUTION

•Please carry out regular maintenance

of the vehicle according to the

requirements in BYD Auto "Warranty

and Maintenance Service Manual".

Maintenance Plan Requirements

The vehicle shall be maintained according

to the regular maintenance schedule.
If the vehicle is operated primarily under

one or more of the following special

conditions, certain maintenance plan items

may need to be performed more frequently.

• Road conditions

• Driving on rough, muddy or slushy

roads.

• Driving on dusty roads.

• Driving conditions

• Towed trailer, camping trailer or roof

rack is used.

Содержание ATTO 3 2022










































































































































































































Результаты поиска

Содержание ATTO 3 2022

Отзывы:

Похожие инструкции для ATTO 3 2022

Бренды по названию

Популярные бренды

BYD ATTO 3 2022, Руководство пользователя

Результаты поиска

Содержание ATTO 3 2022

Отзывы:

Похожие инструкции для ATTO 3 2022

Бренды по названию

Популярные бренды