BYD ATTO 3 2022 Скачать руководство пользователя страница 46

Страница: 46 / 201

DASHBO

ARD

Please check the infotainment

system.*

The infotainment system is faulty. In this

case, park the vehicle, and contact a BYD

authorized dealer or service provider.

The function of the

infotainment system is

limited.*

The function of the infotainment system is

limited. In this case, park the vehicle, and

contact a BYD authorized dealer or service

provider.

The smart camera is

unavailable.*

The smart camera is unavailable. In this

case, park the vehicle, and contact a BYD

authorized dealer or service provider.

Please check the LDWS.*

The Lane Departure Warning System (LDWS)

is faulty. In this case, park the vehicle, and

contact a BYD authorized dealer or service

provider.

Please check the ICC or LKS.*

The Intelligent Cruise Control (ICC) or Lane

Keeping System (LKS) system is faulty. In this

case, park the vehicle, and contact a BYD

authorized dealer or service provider.

The function of the ICC or LKS

is limited.*

The function of the ICC or LKS is limited. In

this case, park the vehicle, and contact a BYD

authorized dealer or service provider.

Содержание ATTO 3 2022










































































































































































































Результаты поиска

Содержание ATTO 3 2022

Отзывы:

BYD ATTO 3 2022, Руководство пользователя, Страница: 46 / 201

Результаты поиска

Содержание ATTO 3 2022

Отзывы: