BYD ATTO 3 2022, Руководство пользователя

Страница: 28 / 201

27
SAFET
Y
02
When any CRS is installed, except for a
booster seat without a back, it is advised
that the adjustable vehicle head restraint is
removed, and stowed safely.
When a booster seat without a back is
installed, the adjustable vehicle head
restraint must remain fitted, and adjusted
to the appropriate height for the seated
child.
When the seat position does not have any
CRS or booster seat installed, the adjustable
vehicle head restraint must remain fitted,
and adjusted to the appropriate height for
the occupant.
Attach the tether strap to the anchorage,
then tighten the top tether as per the
instructions provided by the manufacturer
of the child seat.
Make sure that the tether strap is attached
securely.
(1) Top straps
(2) Anchorage
CAUTION!
•Before installing the child seat top
tether, remove the trunk luggage
compartment cover.
•If a headrest is removed, make
sure to store it safely in the luggage
compartment.
•BYD recommends installing the CRS
using the ISOFIX anchorage points of
the car.
• If the driver seat obstructs or interferes
with the correct installation of the child
restraint system, on the rear outboard
seat behind the driver, install the child
restraint system on the other rear
outboard seat.
Child restraint installed on front passenger Child restraint installed on front passenger
seat seat
• When using a rear-facing child seat, turn
the PAB switch to OFF to disable the
front passenger seat airbag.
• For details, see PAB Switch*
• Identify the appropriate anchorages and
install the child restraint system.
• The rear outboard seats are equipped
with ISOFIX/i-Size anchorages. The
anchorage locations are identified by a
marking (see illustration) located on the
seat back, directly above the associated
anchorages.
• The front passenger seat is equipped
with a tether strap anchorage on the
back of the seat.