BYD ATTO 3 2022, Руководство пользователя

Страница: 158 / 201

157
MAINTENANCE
07
Drive motor anti-freeze
replacement
Replace the long acting organic acid refrigerant once every
4 years or 100,000 km, whichever comes first.
Brake fluid checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 12 months or 20,000 km, and
subsequent inspections every 12 months or 20,000 km, where
damaged parts should be replaced in time.
Brake fluid replacement Replace once every 2 years or 40,000 km.
Checking of vehicle
module fault codes
(cleared after recording)
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 12 months or 20,000 km, and
subsequent inspections every 12 months or 20,000 km, where
damaged parts should be replaced in time.
Power battery tray, guard
plate, crash bar, and
mount point torque (QH)
checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 12 months or 20,000 km, and
subsequent inspections every 12 months or 20,000 km, where
damaged parts should be replaced in time.
Capacity testing and
calibration
Every 72,000 km or 6 months
Checkup and replacement
of gear oil in transmission
(NT30 transmission)
The initial replacement should be performed at 24 months or
40,000 km, and subsequent replacements every 24 months or
48,000 km.
Powertrain leaks or bumps
checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 12 months or 20,000 km, and
subsequent inspections every 12 months or 20,000 km, where
damaged parts should be replaced in time.
Loose HV harness or
connectors checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 12 months or 20,000 km, and
subsequent inspections every 12 months or 20,000 km, where
damaged parts should be replaced in time.
HV module appearance,
deformation or oil stain
checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 12 months or 20,000 km, and
subsequent inspections every 12 months or 20,000 km, where
damaged parts should be replaced in time.
Checking of the interface
of each charging
connector for foreign
bodies or ablations
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 12 months or 20,000 km, and
subsequent inspections at every 12 months or 20,000 km, where
damaged parts should be replaced in time.