BYD ATTO 3 2022, Руководство пользователя

Страница: 108 / 201

107
USING AND DRIVING
05
Driving Key Notes
• Drive slowly and carefully along gravel
roads. To prevent tire damage, do not
drive over sharp-edged obstacles.
• Slow down on bumpy or uneven roads.
• Avoid driving through flooded areas as
much as possible.
• Slow down when driving against strong
winds.
• Drive carefully on slippery roads, such
as roads covered in ice, snow or sand; or
surfaces like wet ceramic tiles or epoxy
resin.
REMINDER
•The battery is located in the vehicle's
chassis. Make sure to avoid bumping
when driving on rough terrain.
•Before driving, make sure that
electronic parking is fully released and
that the electronic parking indicator
light is off.
•Do not leave the vehicle on "OK"
ignition status.
•Remember to carry the smart key
when leaving the vehicle.
•Slow down when driving down
steep slopes, and avoid braking
too frequently to prevent disc
overheating, which affects brake
performance.
•Be careful when accelerating or
braking on slippery roads. Quick
acceleration or sudden braking will
cause skidding.
REMINDER
•Make sure no occupant sticks their
head or hands outside the vehicle,
specially when it comes to children.
•Large amounts of water entering the
front compartment will cause damage
to the power system and electrical
components.
WARNING
• Drivers must ensure the safety of all
vehicle occupants, and show them
how to handle the vehicle's functions
properly.
Winter Driving Precautions
1. Make sure the refrigerant is freeze-proof.
• Use refrigerant of the same type as the
one used originally. Fill up refrigerant
into the cooling system based on
ambient temperature.
• Improper refrigerant will damage the
cooling system.
2. Check batteries and cables conditions.
• Low voltage battery capacity is lower
in cold weather, so they must be fully
charged when winter comes.
3. Avoid door frost.
• Spray some deicing agent or glycerin in
the lock hole to prevent freezing.
4. Use anti-freeze washer fluid.
• These can be found in the BYD
authorized dealer or service provider
and the auto parts stores.
• The water and anti-freeze ratio must
conform to manufacturer instructions.