71
of 216
6.3.1 Channel settings
Note:
In the Basic setup menu you can define whether you want the channel settings to apply to all
the measurement programs ("globally"), or specifically to each measurement program
("program depending"). Please note that when the "globally" option is set, any change will
overwrite the settings for all the measurement programs. For further details, please see section
6.1.14 "Channel settings" on page 62. The factory-set default is "globally".
Diagram 31: "global" and "program dependent" channel settings
In the "Channel settings" menu (M21), you can assign the physical connectors (A and B) to the active X
and Y measurement channels. There is no restriction on which active measurement channel (X-axis or
Y-axis) you assign to which connector. You can also define a time axis instead of a connector.
1
In measurement mode, tap anywhere on the touchscreen. The icon appears in the
bottom-right corner.
2
Tap to open the "Configuration Main Menu".
3
Tap the "Program Setup" icon.
4
Tap the "Channel Setup" icon.
IMPORTANT:
Before closing the menu you must press
[ENTER]
to save any changes you have made
to the settings, otherwise the settings are lost.
Содержание DIGIFORCE 9311
Страница 3: ...3of 216...
