Burster DIGIFORCE 9311, Руководство по эксплуатации, Страница: 62 / 216

62
of 216
6.1.14 Channel settings
In the "Channel settings" menu (M83), you can choose whether you want the channel settings to apply to
all the measurement programs ("globally"), or specifically to each measurement program ("program
depending"). For further details on the possible channel settings, please refer to section 6.3.1 "Channel
settings" on page 71.
Note: The factory-set default is "globally".
1 In measurement mode, tap anywhere on the touchscreen. The icon appears in the
bottom-right corner.
2 Tap to open the "Configuration Main Menu".
3 Tap the "Basic setup" icon.
4 Tap the "Channel Setup" icon.
5 Tap "Channel Setup" to switch between "program depending" and "globally".
If you have selected the "program depending" option, when making channel settings you must
start afresh for each measurement program. If you have selected "globally", the channel settings
for one measurement program are adopted for all the other measurement programs.
6 Tap to return to the "Basic setup" menu.
IMPORTANT: If you close the menu when "globally" is set, all the previous program-specific channel
settings are lost. The settings from the currently set measurement program are then
copied to all the other programs.