
171
of 216
6.3.7 Sensor test
The "Sensor test" function can be used for cyclical testing of the active measurement channels. In the
test, the DIGIFORCE
®
9311 compares the live measurements with stored reference values. The
DIGIFORCE
®
9311 evaluates the result as "sensor test OK/NOK" depending on whether or not the
measured value lies within the defined tolerance; for details please see section 3.8 "Sensor test" on page
21. The "Sensor test" can be launched using the "IN_STEST" control signal or a configurable function
key.
1
In measurement mode, tap anywhere on the touchscreen. The icon appears in the
bottom-right corner.
2
Tap to open the "Configuration Main Menu".
3
Tap the "Program Setup" icon.
4
Tap the "Sensor Test" icon.
5
Enable the "Sensor test active" checkbox under "Channel X [mm]".
6
Measure the "Measured Setpoint" by tapping
[0.00000]
.
7
Tap "Tol/-]"
to enter the allowed tolerance.
8
Repeat steps 5 to 7 for "Channel Y [N]".
9
Tap to return to the "Program Setup" menu.
Содержание DIGIFORCE 9311
Страница 3: ...3of 216...