Burster DIGIFORCE 9311, Руководство по эксплуатации

Страница: 126 / 216

126
of 216
13 If you have selected a "Type Y threshold",
tap the fields [Y] , [Xmin] and [Xmax] and in
each case use the keypad to enter the
coordinates to specify the position and size
of the threshold.
14 Tap or to set the relevant direction for the entry/exit side of the threshold.
Note: For the "Y threshold" type, the measurement curve can cross the threshold from
either side (top, bottom) or from just one side. You can also define that the
measurement curve shall not cross the threshold. If this condition is breached,
the DIGIFORCE
®
9311 gives the measurement an NOK evaluation.
15 Tap to return to the "Select evaluation elements" menu.