Burkert Flowave 8098, Руководство по эксплуатации

Страница: 32 / 354

32
Technical data
Type 8098 FLOWave L
6.7 Specifications of the Ethernet Industrial
communication
Table 12: Specifications of the industrial communication module
Network speed 10/100 mbps
Auto negotiation Yes
Auto MDI/MDI-X Yes
Switch function Yes
Network diagnostics Yes, via error telegram
MAC-ID
Individual identification number, stored in the module and on the
outside of the device (see Type label)
Device name Ethernet (factory setting) FLOWave (name can be changed)
6.7.1 Modbus TCP protocol
TCP port
502
Protocol
Internet protocol, version 4 (IPv4)
Network topology
• Tree
• Star
•
Line (open daisy chain)
IP configuration
• Static IP address
• Not supported:
− BOOTP (Bootstrap Protocol)
− DHCP (Dynamic Host Configuration Protocol)
Transmission speed
10 and 100 MBit/s
Data transport layer
EtherNet II, IEEE 802.3
Modbus function codes
1, 2, 3, 4, 15, 16, 23
Read/write register
Maximum 125 read registers and 123 write registers per telegram
Message mode
Server
Input (Target to Originator)
• All diagnostics and errors information has the highest priority
and can be read by a PLC (refer to the concerned protocol file
available at country.burkert.com ).
• PDO: value, status, unit
• Device and modules: status
• Functions: value, status
PDO = Process Data Object, Target = Server, Originator = Client.
English