Burkert Flowave 8098, Руководство по эксплуатации

Страница: 48 / 354

48
Installation in the pipe
Type 8098 FLOWave L
Pipe insulation
No pipe insulation
Fig. 16: Thermal insulation of the pipe
→
To make sure the internal temperature of the transmitter with cable glands does not exceed the
authorized maximum value, install the device as recommended in Fig. 17 .
→
To make sure the internal temperature of the transmitter does not exceed the authorized maximum value,
install an Ethernet device variant as recommended in Fig. 18 .
Not recommended
Recommended
1)
Recommended
1)
1)
These orientations are valid for all the positions of the Type SE98 transmitter on the Type S097 flow sensor. Refer to
„Fig. 13: Possible positions of the transmitter SE98“ auf Seite 40
Fig. 17: Orientation of a device variant with cable glands to avoid effects of high liquid temperatures
Not recommended
Recommended
1)
Recommended
1)
Not recommended Recommended
1)
1)
These orientations are valid for all the positions of the Type SE98 transmitter on the Type S097 flow sensor. Refer to
„Fig. 13: Possible positions of the transmitter SE98“ auf Seite 40
Fig. 18: Orientation of an Ethernet
device
variant to permit the heat dissipation
English