Burkert Flowave 8098, Руководство по эксплуатации

Страница: 142 / 354

142
General settings – Maintenance
Type 8098 FLOWave L
14.3 Resetting the device
WARNING
Risk of injury due to non-conforming adjustment.
Non-conforming adjustment could lead to injuries and damage the device and its surroundings.
▶
The operators in charge of adjustment must have read and understood the contents of the Operating
Instructions.
▶
In particular, observe the safety recommendations and intended use.
▶
The device/installation must only be adjusted by suitably trained staff.
14.3.1 Restarting the device
To restart the device, do the following:
→
Go to the
CONFIGURATION
view.
→
General settings
→
Confirm to access the Parameter view.
→
Go to the MAINTENANCE view.
→
Reset device
→
Restart
The device restarts.
14.3.2 Resetting the device to all its factory settings
To reset the device to all its factory settings, do the following:
→
Go to the CONFIGURATION view.
→
General settings
→
Confirm to access the Parameter view.
→
Go to the MAINTENANCE view.
→
Reset device
→
Reset to factory settings to reset the device to all its factory settings.
The device is reset to all its factory settings.
→
Acknowledge the displayed message.
English