Burkert Flowave 8098, Руководство по эксплуатации

Страница: 295 / 354

295
Outputs – Parameter
Type 8098 FLOWave L
To configure a digital output as an output with switching thresholds, do the following:
→
Go to the CONFIGURATION view.
→
Outputs
→
Confirm to access the Parameter view.
→
Output 2:digital
or
Output 3:digital
→
Mode
→
Threshold
→
Settings The Current settings are displayed
→
Choose the process value associated to the digital output
→
Choose the hysteresis switching or the window switching of the digital output
If the high threshold is equal to the low threshold, the digital output is deactivated.
→
Set the value of the high threshold
→
Set the value of the low threshold
→
Choose to invert the switching or not
→
Set the value of the switching time delay The New settings are displayed.
→
Save.
The digital output is configured to switch depending on 2 threshold values.
18.5.3 Configuring a digital output as a frequency output
A frequency output transmits a frequency signal which is proportional to the chosen process value.
To configure a digital output as a frequency output, do the following:
→
Go to the
CONFIGURATION
view.
→
Outputs
→
Confirm to access the
Parameter
view.
→
Output 2:digital or Output 3:digital
→
Mode
→
Frequency
→
Settings The Current settings are displayed
English