Burkert Flowave 8098, Руководство по эксплуатации

Страница: 24 / 354

24
Technical data
Type 8098 FLOWave L
6.2.3 EHEDG certification
• EL class I
• The following device variants are EHEDG certified:
Process connections Diameters
• Clamp 1) connections according to ASME BPE
(DIN 32676 series C)
• 3/8", 1/2", 3/4", 1", 1 1/2", 2", 2 1/2", 3"
• Clamp connections according to DIN 11864-3
series C
• 1/2", 3/4", 1", 1 1/2", 2"
• Flange connections according to DIN 11864-2
series C
• 1/2", 3/4", 1", 1 1/2", 2"
• Clamp 1) connections according to
DIN 32676 series B
• DN08, DN15 (except device variants with a clamp
diameter of 34.0 mm), DN25, DN40, DN50, DN65,
DN80
• Clamp 1) connections according to
DIN 32676 series A
• DN08, DN15, DN25, DN40, DN50, DN65, DN80
• Clamp connections according to DIN 11864-3
series A, DIN 11864-3 series B
• DN08, DN15, DN25, DN40, DN50
• Clamp 1) connections according to SMS 3017 /
ISO 2852 for pipes according to SMS 3008
• DN25, DN40, DN50
• Flange connections according to DIN 11864-2
series A, DIN 11864-2 series B
• DN08, DN15, DN25, DN40, DN50
• External-threaded 2) connections according to
DIN 11851 series A
• DN65, DN80
1) The EHEDG compliance is only valid if the connections are used in combination with EHEDG-compliant
gaskets from Combifit International B.V.
2) The EHEDG compliance is only valid if the connections are used in combination with EHEDG-compliant
gaskets:
•
ASEPTO-STAR k-flex upgrade gaskets from Kieselmann GmbH, Germany
• SKS gaskets set DIN 11851 EHEDG with EPDM or FKM inner gasket from Siersema Komponenten
Service (S.K.S.) B.V., Netherlands
→
To make sure you use EHEDG-compliant gaskets, refer to the "EHEDG Position Paper" available on the
EHEDG website.
The manufacturer of the device does not supply any gaskets for the process connections.
6.2.4 ATEX / IECEx certification
→
Refer to the ATEX / IECEx supplement for the device. The supplement is available at
country.burkert.com .
English