Burkert Flowave 8098, Руководство по эксплуатации

Страница: 110 / 354

110
General settings – Parameter
Type 8098 FLOWave L
12.5 Setting the basic parameters for identifying the
device on büS
The Displayed name , the Location and the Description allow you to clearly identify the device on büS.
12.5.1 Entering a name for the device
The entered name will be shown on any display (e.g. the Communicator software) connected to büS.
To enter the name of the device that will be shown on any display connected to büS, do the following:
→
Go to the CONFIGURATION view.
→
General settings
→
Confirm to access the Parameter view.
→
büS
→
Displayed name
→
Enter the name by selecting and confirming each character.
→
OK
→
Save the name.
The name is set.
12.5.2 Entering the location of the device
The entered location will be shown on any display (e.g. the Communicator software) connected to büS.
To enter the information where the device is geographically located, do the following:
→
Go to the CONFIGURATION view.
→
General settings
→
Confirm to access the Parameter view.
→
büS
→
Location
→
Enter the location by selecting and confirming each character.
→
OK
→
Save the location.
The location is set.
English