Buffalo TeraStation Скачать руководство пользователя страница 57

Страница: 57 / 160

TeraStation User Manual

Access Restrictions on NT Domain

The TeraStation can download users, groups, and passwords from an NT Domain server. This procedure is

recommended for system administrators only.

Create an account on the Domain Controller for the TeraStation.

Note:

If there is an option to “Accept accounts for computers with Windows 2000 or earlier”, then select it.

Follow the instructions in the previous section to add access restrictions to the domain.

Notes:

• You can enter up to 23 bytes(UTF-8) for NT Domain Name. Alphanumeric characters, multi-byte characters, -(hyphen),

_(underscore), and .(dot) may be used. Do not use a symbol as the first character.

• You can enter up to 63 bytes(UTF-8) for NT Domain Controller Name. Do not use multi-byte characters. Alphanumeric

characters, -(hyphen), and _(underscore) may be used. Do not use a symbol as the first character.

Select

NT Domain

Enter NT Domain Name.

Enter NT Domain Controller Name.

Enter Administrator Name.

Enter Administrator Password.

Enter WINS Server IP Address (Optional).

Click

Save

Click

Network

Workgroup/Domain

Modify Settings

in Settings.

Содержание TeraStation

































































































































































Результаты поиска

Содержание TeraStation

Отзывы:

Похожие инструкции для TeraStation

Бренды по названию

Популярные бренды

Buffalo TeraStation, Руководство пользователя

Результаты поиска

Содержание TeraStation

Отзывы:

Похожие инструкции для TeraStation

Бренды по названию

Популярные бренды