Buffalo TeraStation Скачать руководство пользователя страница 136

Страница: 136 / 160

TeraStation User Manual

135

Disks

Format Disk

Format the additional hard disk installed to the TeraStation and the USB connector. Data will

be completely erased if the disk is formatted. Use extra caution not to loose your important

data. The time required to format a disk will vary depending on the space to be used (a few

minutes).

* You cannot format a disk when you have set up a backup job.

Warning: Do not format a drive if the TeraStation is configured as a backup device for

another TeraStation.

* Format type

TeraStation can format or recognize the following format types:

Format type

Descriptions

EXT3

(USB hard drive

only)

It is recommended when you may reconnect to TeraStation and use it.

• Supports both Reading/Writing.

• Supports Journaling File System.

• Takes for a long time to format (a several minutes or more).

• Less space is available than XFS after formatted.

• More files in 1 folder, slower the access space.

* Use EXT3 Reader included in this package when reading data directly

connected to your PC.

XFS

(USB Hard Drive/

TeraStation

Internal Hard

Drive)

This format is recommended when you use the additionally installed

hard disk at the TeraStation.

• Supports both Reading/Writing.

• Supports Journaling File System.

• More space is available than XFS after formatted.

• Access speed will not degrade even though more files in 1 folder.

This is not supported by legacy TeraStation (such as HD-LAN, HD-HLAN,

HD-HLWG, HD-HGLAN Series).

* You cannot read data by directly connecting a PC.

FAT32

(USB hard drive

only)

We recommend this format type when you want to connect the hard

drive to your PC to view data in it.

You can still connect the hard drive to Windows PC in case that the

TeraStation fails.

• Supports both Reading/Writing.

• Cannot copy, backup, or replicate data with more than 4 GB per file.

• Cannot use some characters which are used in Mac OS such as [:].

NTFS

(USB hard drive

only)

Cannot format from Settings. It is Read-Only. Be able to use to connect

to Windows 8/7/Vista/XP/2000, or Windows Server2003/Server2008.

• Read-only (not writable during backup or replication either).

HFS+

(USB hard drive

only)

Cannot format from Settings. Read-Only.

Can be used to connect to OS X 10.3.9 or later.

• Read-only (not writable during backup or replication either).

* GPT partitions (64 bit) are recommended for connected USB hard drives of 2.2 TB or

larger. Other types of partitions will not address the full size of larger drives. GPT partitions

are supported by Windows 8, Windows 7, Windows Vista, Windows Server 2003 SP1 or

later, Windows Server 2008, OS X 10.4 or later, and Buffalo TeraStation and LinkStations

(e.g. TS-XL, TS-XEL, TS-WXL, LS-XHL, and LS-CHL series). Note that other operating systems

(including Windows XP) may not detect GPT partitions correctly. To read hard drives

larger than 2.2 TB from Windows XP, either use a proprietary GPT solution, or use multiple

partitions smaller than 2.2 TB.

Содержание TeraStation

































































































































































Результаты поиска

Содержание TeraStation

Отзывы:

Похожие инструкции для TeraStation

Бренды по названию

Популярные бренды

Buffalo TeraStation, Руководство пользователя

Результаты поиска

Содержание TeraStation

Отзывы:

Похожие инструкции для TeraStation

Бренды по названию

Популярные бренды