TeraStation User Manual
143
System - Maintenance
Email Notification
Click
Modify Settings
to change settings.
Click
Send Test
Message
to send a
test email to the email
address which has
been set.
Notification
Select whether using Email notification feature or not.
SMTP Server Address
Enter SMTP Server Address (Mail Server Address).
SMTP Port No.
Enter SMTP Port No..
* The standard port number (25) is used if not specified. Also, User
authentication method is set to
Disable
or
POP before SMTP
, the standard port
number (25) is used regardless of the number you entered in this field.
Authentication Type
Select Authentication Type from
POP before SMTP
,
LOGIN(SMTP-AUTH)
, and
CRAM-MD5(SMTP-AUTH/CRAM-MD5)
.
POP3 Server Address
Enter POP3 Server Address (Email server address).
POP3 Port No.
Enter POP3 Port No..
* The standard port number (110) is used if not specified.
SSL/TLS
When
LOGIN(SMTP-AUTH)
and
CRAM-MD5(SMTP-AUTH/CRAM-MD5)
are selected
for Authentication Type, specify either using
SSL
or
TLS
.
Username
Enter a user name that will be used for authentication.
Password
Enter a password that will be used to verify.
Subject
Specify the subject of the email to be sent.
* Do not use multi-byte characters. It may cause the character corruption.
Recipient(s)
Enter the email address of the receiver, and click
Add
.
* You can register up to 5 email addresses as receivers.
Report
Select the contents to send in the email notification.
•
HDD Status Report
Sends the condition of the hard drives at the specified time on “HDD Status
Report”.
•
System Alert
Sends when system is rebooted or shut down, or RAID configuration is
changed.
•
Disk Error
Sends when an hard drive error is recognized.
•
Fan Failure
Sends when the fan error is recognized.
•
Backup Complete
Sends when the backup is complete.
•
Quota Report
Sends when the Quota Space Limitation is exceeded at the time which is
specified on HDD Status Report.
Syslog
Click
Modify Settings
to change settings.
Syslog
Select
Enabled
for Syslog Transfer and select
Save
to transmit the system log.
To view a log, select
System Log
,
File Log (SMB)
,
FTP Log
for Logs To Transfer. You
can transmit the log by entering the IP address of the syslog server in “Syslog
Server IP Address” field when you select
System Log
,
File Log (SMB)
.
*
FTP Log
does not support to output a log to the syslog server.
Store Files Locally
To store logs on the TeraStation, select
Enable
for Store Files Locally. Select
one of the TeraStation’s shared folders as the Target Folder. A subfolder called
“system_log” will be created in that folder, and logs will be saved to that
subfolder.
* If you select
File Log (SMB)
or
FTP Log
, only file operations from internal hard
drives will be logged. File operations from USB drives will not be logged.
