AC Level 2 Charger
INSTALLATION AND USER’S MANUAL
Page
49
of
59
This document is a
Property of BTCPower Inc.
and shall not be
copied, reproduced, or used as the basis for sale or manufacture
of apparatus without written permission.
09-Mar-20
Revision
T
8.
Operation
8.1.
System Power Up and Testing
DANGER
The charger must NOT be started or put into use without having been commissioned by a fully
trained and authorized personnel.
WARNING
WARNING AGAINST TAMPERING, and PLEASE REFER TO SAFETY WARNINGS PERTAINING TO A RISK
OF FIRE OR ELECTRIC SHOCK FROM SECTION 6.
Front Display Panel
The front panel display allows the user to know the status of the charger and if charging is
taking place.
Switching ON
Once the charger has been installed by a qualified electrician, switch ON the breaker inside
the charger then the main panel breaker. The system and the display should turn ON.
Free Vending Mode
Remove the charging connector from its holder on the front of the charging station. Open the
J1772 plug cover on your vehicle (refer to the vehicles owner’s manual
). Plug the J1772 plug
into the vehicle’s charge port.
Upon insertion, push down on the handle to lock it into place. Normally, the vehicle will
immediately request a charge and the contactor inside the charger can be heard closing. The
display will show ready for charge followed by charging.
OPERATION
