AC Level 2 Charger
INSTALLATION AND USER’S MANUAL
Page
5
of
59
This document is a
Property of BTCPower Inc.
and shall not be
copied, reproduced, or used as the basis for sale or manufacture
of apparatus without written permission.
09-Mar-20
Revision
T
There are no user serviceable parts inside. For service, please contact customer service or your
local distributor.
DO NOT ATTEMPT TO REPAIR THE CHARGE STATION YOURSELF. SERVICE TO THE
UNIT SHALL ONLY BE PERFORMED BY A QUALIFIED PERSONNEL.
If the charging cable is somehow damaged, do not operate the charge station. Contact your
service representative for service immediately. Shut down the power to the unit by switching
the breaker on the supply panel to off position.
1.2.
Symbols and Definitions
Please take special attention to all information marked with the following symbols. These
symbols may be found throughout the manual and on labels affixed to the equipment unit.
DANGER
Indicates High Voltage. It calls attention to items or operations
that could be dangerous to person/s operating this
equipment. Read and follow the instructions carefully. Failure
to do so will result in severe injury or possibly death.
WARNING
Indicates a hazard or unsafe practice which, if not avoided,
may result in severe injury or possibly death.
CAUTION
Indicates a hazard or unsafe practice which, if not avoided,
may result in minor to moderate injury.
NOTE
Indicates important information to consider, otherwise,
improper installation and/or damage to components may
occur.
SAFETY GUIDELINES
