AC Level 2 Charger
INSTALLATION AND USER’S MANUAL
Page
46
of
59
This document is a
Property of BTCPower Inc.
and shall not be
copied, reproduced, or used as the basis for sale or manufacture
of apparatus without written permission.
09-Mar-20
Revision
T
7.
Initially select the “Test” button (circled in orange
on the previous page)
8.
The banner will show that the settings are temporarily being applied and will resort back
to previous setting after a shown time period as seen below:
9.
The succeeding set of procedures are for testing network internet connection. Note that
you will have about three (3) minutes to complete these next procedures.
Testing Internet Connectivity/Returning PC to DHCP
1.
After initiating test mode on previous page, test for Internet connection by doing search
in browser. If the connected WAN network is using the 192.168.1.xxx network schema,
skip to next page of these instructions.
2.
Repeat instructions on first three pages of the “ Configuring PC to connect to Wireless
Access Point ” of this document. In the “Internet Protocol Version 4 (TCP/IPv4) Properties”
window.
3.
Select the “Obtain an IP address automatically” option as shown below
(circled in red):
4.
Click “OK” (circled in red):
Testing Internet Connectivity/Returning PC to Static IP
1.
If there is connection to the Internet, return the PC IP address to a static address as
described under “Configuring PC to connect to Wireless Access Point” on the previous
pages.
2.
Click “Apply” (green circle in
top screen shown on the previous page), otherwise select
“Discard” or wait until timer expires.
INSTALLATION
