AC Level 2 Charger
INSTALLATION AND USER’S MANUAL
Page
34
of
59
This document is a
Property of BTCPower Inc.
and shall not be
copied, reproduced, or used as the basis for sale or manufacture
of apparatus without written permission.
09-Mar-20
Revision
T
Single
Port Charger
(70A)
–
Pedestal
Connect L1 and L2 to the input safety breaker. BTCPower highly recommends crimp ferrule lugs
to be used to make all electrical connection to the input safety breaker. In addition, a torque
wrench should be used on the input breaker screw terminals. Set the wrench to a torque of
80lb.in or 9 N.m. A pull test should be done on the wire connections to ensure proper
connection.
SquareD Breaker (BDL26100)
Charger
Wire Size Range
Torque Requirement
70A
6
–
3 AWG (recommended)
80 lb.in
(9 N.m)
* Temperature rating of wires should be 60°C for 3AWG and 90°C for 6AWG. Use Copper wires only.
NOTE
Appropriate wire size / gauge to be used will be determined by the installer in-charge.
INSTALLATION
