AC Level 2 Charger
INSTALLATION AND USER’S MANUAL
Page
11
of
59
This document is a
Property of BTCPower Inc.
and shall not be
copied, reproduced, or used as the basis for sale or manufacture
of apparatus without written permission.
09-Mar-20
Revision
T
5.2.
ADA Consideration
STANDARDS FOR ACCESSIBLE DESIGN for Americans with Disabilities is applicable when choosing
the location and placement of all Electric Vehicle Supply Equipment. The following is a direct
excerpt from the 2010 ADA Standards for Accessible Design:
http://www.ada.gov/2010ADAstandards_index.htm
“The Department of Justice published revised regulations for Titles II and III of the Americans with
Disabilities Act of 1990 “ADA” in the Federal Reg
ister on September 15, 2010. These regulations
adopted revised, enforceable accessibility standards called the 2010 ADA Standards for
Accessible Design “2010 Standards” or “Standards”.
The 2010 Standards set minimum
requirements
–
both scoping and technical
–
for newly designed and constructed or altered
State and local government facilities, public accommodations, and commercial facilities to be
readily accessible to and usable by individuals with disabilities.
Adoption of the 2010 Standards also establishes a revised reference point for Title II entities that
choose to make structural changes to existing facilities to meet their program accessibility
requirements; and it establishes a similar reference for Title III entities undertaking readily
achievable barrier removal.
The Department has assembled this online version of the official 2010 Standards to increase its
ease of use. This version includes:
•
2010 Standards for State and Local Government Facilities Title II
•
2010 Standards for Public Accommodations and Commercial Facilities Title III
The Department has assembled into a separate publication the revised regulation guidance
that applies to the Standards. The Department included guidance in its revised ADA regulations
published on September 15, 2010. This guidance provides detailed information about the
Department’s adoption of the 2010 Standards including changes to the Standards, the
reasoning behind those changes, and responses to public comments received on these topics.
The document, Guidance on the 2010 ADA Standards for Accessible Design, can be
downloaded from:
PRE-INSTALLATION
