AC Level 2 Charger
INSTALLATION AND USER’S MANUAL
Page
4
of
59
This document is a
Property of BTCPower Inc.
and shall not be
copied, reproduced, or used as the basis for sale or manufacture
of apparatus without written permission.
09-Mar-20
Revision
T
1.
Safety Guidelines
SAVE THESE INSTRUCTIONS
This document contains important instructions for the installation, operation, and maintenance
of AC Level 2 Charger with Models 30A, 40A, and 70A, Pedestal and Wall Mount, in Single and
Dual Configurations. These instructions should be retained for future reference.
1.1.
Important Safety Instructions
WARNING
INSTRUCTIONS PERTAINING TO A RISK OF FIRE OR ELECTRIC SHOCK
DANGER
READ THIS MANUAL CAREFULLY BEFORE YOU BEGIN
This
AC Level 2 Charger
manages electricity and may be hazardous. The equipment should be
installed, adjusted, and serviced only by qualified electrical personnel familiar with the
construction and operation of this type of equipment and the hazards involved, and in full
compliance with all local and national codes and standards. Failure to observe this precaution
could result in severe injury or death.
Read this manual completely and become familiar with the equipment prior to performing any
procedures specified in the manual and energizing the equipment. Inspection and
maintenance of this equipment should be performed in accordance with the procedures
detailed in this manual.
In situations where it is not possible to perform an installation following the procedures stated in
this document, contact BTCPower, Inc. BTCPower, Inc. will not be responsible for any damages
that may occur resulting from custom installations that are not stated in this document.
SAFETY GUIDELINES
