AC Level 2 Charger
INSTALLATION AND USER’S MANUAL
Page
39
of
59
This document is a
Property of BTCPower Inc.
and shall not be
copied, reproduced, or used as the basis for sale or manufacture
of apparatus without written permission.
09-Mar-20
Revision
T
4.
Install the Wi-Fi Module
4.1.
Install the Wi-Fi module and secure it to the bracket with zip ties as shown in
Figure 4.1
.
4.2.
Connect one end of the blue Ethernet cable to the power supply (shown in
Figure
4.2a
) and the other end going to the left PC Ethernet port (shown in
Figure 4.2b
).
4.3.
Connect the white Ethernet cable from the bottom of the Wi-Fi module to the power
supply as shown in
Figure 4.3
.
4.4.
Connect the power supply wires from the bottom of the unit to the input power
terminals of the terminal block located at the right side of the charger. See
Figure 4.4
.
4.5.
Connect the ground wire to any terminal block mounting chassis ground as shown in
Figure 4.5
.
INSTALLATION