Brusa NLG664-U0, Техническая информация и пуск в эксплуатацию

Страница: 40 / 64

Technical information
and start-up
Fast Charger NLG6xx
40
7.1.4.2 Pin 2 EV_CAN_H / Pin 8 EV_CAN_L
INFORMATION

These two pins must be connected to the CAN bus of the vehicle. This enables control of the
charger.

This CAN bus offers WakeUp, see chapter 7.3.1 WakeUp via CAN
(CAN for Vehicle Control Unit (VCU))
Internal
wiring

CAN 2.0B, 500 kBaud

In the charger, there is no termination present (CAN-terminating resistor)

The CAN IDs can be changed by PARAM tool if required.
7.1.4.3 Pin 3 Kl30C
Internal
wiring

In case of a crash (other vehicle bumps into charging vehicle), the charger immediately disconnects the energy
flow.

Control Pilot is set to status B .

AC voltage is switched off by EVSE .

<1 V conforms to Crash
10
0n
F
Pin 3
Kl30c
1k 1k
10n
F
22k
10k
47
0p
F
1,0V
3,2V
Pin 8
EV_CAN_L
Pin 2
EV_CAN_H
33
pF
33
pF
TJA1043