Brusa NLG664-U0, Техническая информация и пуск в эксплуатацию

Страница: 13 / 64

Technical information
and start-up
Fast Charger NLG6xx
13
3.3.4 Safety instructions for electrical systems
DANGER
High voltage!
Danger to life!

Never touch the HV wires or HV connections without ensuring the absence of voltage
beforehand!

The device may only be connected by a qualified electrician! Refer to chapter 3.5 Requirements
on the start-up personnel

Safety installations must never be by-passed or circumvented! Any resulting malfunctions could
have life threatening consequences!

Never connect the device to a socket without a protective earth conductor!

Always apply a residual current device (RCD) to the mains connection!
CAUTION
Damage to the cable!
Fire hazard!

If a cable drum is used as an extension cord to the mains connection, it might ignite due to heat
accumulation! Therefore, always unwind the cable drum completely!
INSTRUCTION
The device is never to be opened! The opening of the device (sealed housing) directly leads to the
forfeiture of any liability by BRUSA Elektronik AG! Refer to chapter
11 Liability
INFORMATION
When working on a HV system, the following 5 safety rules have to be strictly adhered to:

Disconnect system from power.

Switch off the ignition.

Remove service / maintenance plug and/or turn off main battery switch

Remove fuse

Ensure that the system cannot be reactivated.

Keep ignition key safe to prevent unauthorised access.

Keep the service / maintenance plug safe in order to prevent unauthorised access and/or
use lockable cover cap to ensure that the main battery switch is not reactivated.

Ensure that the device is de-energised by using a suitable voltage tester (pay attention to the
voltage range!)

Earth and short-circuit the system.

Cover or isolate adjacent live parts.