Brusa NLG664-U0, Техническая информация и пуск в эксплуатацию

Страница: 21 / 64

Technical information
and start-up
Fast Charger NLG6xx
21
5
Use and limitations of the product
5.1 Proper use
The BRUSA Fast Charger NLG6xx is suitable for the integration into vehicles for charging different battery
types such as Li-ion batteries, NiCd batteries or LeadAcid batteries. In case you plan to use it for other
purposes, please contact the company BRUSA Elektronik AG in advance at the manufacturers address as
given in chapter 4.6 .

The operator must always ensure that the individual operating limits of the connected battery are
not exceeded in any phase of the charging process.

The charger must exclusively be operated within the limits defined in chapter 5.2 .

Compliance with the relevant EMV directive has to be proven by the vehicle integrator at the vehicle itself.
5.2 Improper Use / Limitations of the product
Applications that do not conform to the conditions and requirements stated in the technical documents and
data sheets of the manufacturer are regarded as improper use.
The following limit values are defined for the operation of the Fast Charger NLG6xx. Operation outside of
these defined limit values may lead to the device becoming damaged and subsequently to life-threatening
situations and is therefore not permitted!
NLG664 / 665 Unit
Min. Input voltage 1-phase 200 V
AC
Max. Input voltage 1-phase 250 V
AC
Min. Input voltage 3-phase 360 V
AC
Max. Input voltage 3-phase 440 V
AC
Max. Input current 3-phase (each phase) 32 A
Max. Input current 1-phase (limited on SW side) 16 A
Max wiring system voltage (destruction of the device) 27 V
Max. wiring system current (without motor control) 350 mA
Max. cooling circuit pressure 3.0 bar
Ambient temperature range for storage - 40 to + 105 °C
Ambient temperature range, operation - 40 to + 85 °C
Max. device installation height 4‘000 metres above sea
level
INFORMATION
Correct function of the charger requires that the voltage range of the battery matches the voltage
range of the charger! Batteries with deviating behaviour may cause the charger to malfunction!
In case of doubt or open questions, please refer to BRUSA Elektronik AG before attempting to
operate the unit.