PARTS TO BE INSTALLED
tbl2014-006-001_a
A. 100 mm (4 in)
B. 5 mm (0.2 in)
3. Open the rear cargo box.
4. On both side of vehicle, remove support plates.
NOTE:
Keep screws for reinstallation.
tbl2011-001-043_a
LH SIDE OF VEHICLE SHOWN
1. Support plate
5. Cut locking ties securing the seat belts.
All except LTD
tbl2011-001-044_a
LH SIDE OF VEHICLE SHOWN
1. Seat belt attachment
LTD Models
6. Cut locking ties securing the seat belts. Do not
remove the piece of tape holding the wiring har-
ness.
tbl2012-003-017_a
LH SIDE OF VEHICLE SHOWN
1. Seat belt attachment
7. Using a hoist, lift the cage assembly over the
vehicle and carefully position it on vehicle. In-
sert the rear of cage first.
NOTE:
As an alternate method, one person at
each attachment point can position the cage on
the vehicle.
CAUTION
To avoid injury or vehicle dam-
ages, never handle the cage alone.
tbl2011-0011-024
8. Secure the cage to vehicle.
PDI KIT PARTS
QTY
M10 x 30 Torx screws
8
tbl2011-001-045
TYPICAL — RH FRONT CAGE ATTACHMENT POINT
20 / 54
2014-2
PREDELIVERY
