PARTS TO BE INSTALLED
21. Position the shifter lever on PARK and install
the required parts and accessories. Refer to
PARTS TO BE INSTALLED
.
PARTS TO BE INSTALLED
Ensure that the following parts are provided with
the vehicle.
ALL EXCEPT LTD
DESCRIPTION
QTY
Tail gate
1
Front shock absorber kit
1
Rear shock absorber kit
1
Shoulder guard
2
Predelivery kit
1
Can-Am decal (XT-P model only)
1
Mudguard kit (CE models only)
1
Mirrors (CE models only)
1
LTD MODELS
PARTS
LOCATION
QTY
Tail gate
In the cargo box
1
Predelivery box #1
In the cargo box
1
Predelivery box #2
Inside lower cargo
box
1
GPS
Inside lower cargo
box
1
Mirrors
(CE models only)
Inside glove box
1
Roof middle
section
In the cargo box
1
Rear wind screen
In the cargo box
1
Half windshield
Inside vehicle, on
seats
1
Sport visor
Inside vehicle, on
seats
1
Rear speakers
Inside predelivery
box #1
1
Predelivery box #3
In the cargo box
1
Battery
Battery Removal
WARNING
Battery BLACK (–) lead must always be dis-
connected first and connected last. Never
charge or boost battery while installed on
vehicle.
1. From underneath dash, unscrew battery holder
retaining nut.
2. Remove battery holder.
tbl2011-001-018_a
1. Bracket retaining nut
2. Battery holder
3. Remove the battery. Keep the bag with battery
fastener for installation.
Battery Preparation
Refer to the
CAN-AM SIDE-BY-SIDE VEHI-
CLES BATTERIES ACTIVATION, CHARGING
AND MAINTENANCE BULLETIN (2014-1)
and
to instructions notice attached to battery for
proper activating, charging and maintenance
procedure.
Battery Installation
NOTE:
The battery should be installed only when
properly activated and charged.
1. Install the battery in its rack.
2.
Make sure to position the negative POST up-
wards.
14 / 54
2014-2
PREDELIVERY