PARTS TO BE INSTALLED
LTD Models
9. Install shock absorbers with the reservoir rear-
wards.
tbl2012-003-012_a
TYPICAL – RH REAR SHOCK ABSORBER
All Models
PARTS
TORQUE
Shock absorber nuts
48 N•m (35 lbf•ft)
LTD Models
10. Connect shock absorber hoses to vehicle air
supply hoses.
tbl2012-003-013_a
TYPICAL
1. RH shock absorber hose
2. Vehicle air supply hose
TORQUE
Air supply hose
6 N•m (53 lbf•
in
)
11. Secure shock absorber hoses to trailing arms.
Ensure to position hose clamp between YEL-
LOW dots.
PDI KIT PARTS
QTY
Rivets
2
tbl2012-003-014_a
RH SIDE OF VEHICLE
1. YELLOW dots
2. Rivet from PDI kit
tbl2012-003-015_a
LH SIDE OF VEHICLE
1. YELLOW dot
2. Install the rivet in this hole
All Models
12. Clean brake disc. Use the
XPS BRAKES AND
PARTS CLEANER (USA) (P/N 219 701 705)
and a
clean rag.
NOTICE
A thin layer of anticorrosion product
can be present on the brake disc and must be
removed before using the vehicle. Not con-
forming to this procedure may lead to a brake
chattering and the brake pads replacement
would be necessary to solve the problem.
13. Install wheels.
14. Lower the vehicle and remove the jack.
15. Tighten wheel lug nuts as per the following
sequence.
PARTS
TORQUE
Wheel lug nuts
100 N•m (74 lbf•ft)
PREDELIVERY
2014-2
17 / 54
