UNCRATING
tbl2011-001-056
REAR OF VEHICLE
15. Prepare 4 pieces of wood:
– 2 pieces of 2x6 by 1.78 m (70 in)
– 2 pieces of 2x6 by 1.27 m (50 in)
16. Install the jack under a frame member, in line
with a suspension arm.
tbl2011-001-057
17. Lift the front of vehicle just enough to place
the pieces of wood (1.78 m (70 in)) between
wheel and base crate, as illustrated below.
tbl2011-001-023_a
1. 2x6 by 1.78 m (70 in)
2. Crate braces
NOTE:
Position the 2x6 over crate braces. The
rear of the 2x6 must be halfway on brace.
tbl2011-001-058_a
1. 2x6
2. Crate braces
18. Lower the front of the vehicle and repeat the
procedure at the rear.
18.1 Place the jack under the hitch to lift the
rear of the vehicle.
tbl2011-001-059
18.2 Position the 2x6 (1.27 m (50 in)) on crate
braces. Place both 2x6 end to end.
tbl2011-001-060_a
1. 2x6 by 1.27 m (50 in)
2. Crate braces
3. Pieces of wood end to end
19. Lower the vehicle.
20. Place the shift lever on N position and care-
fully move the vehicle
forward
out of the crate
base.
PREDELIVERY
2014-2
13 / 54
