PARTS TO BE INSTALLED
tsi2012-006-004_a
TIGHTENED CENTRAL MIRROR COLLAR ONTO CENTRAL
MIRROR BUSHING USING CLAMP PLIERS
4. From inside of vehicle, insert a M6 X 45 Torx
screw and secure with a cap nut to hold tem-
porarily the central mirror bushing in place.
5. Install the second M6 X 45 Torx screw with a
flat washer and a cap nut.
6. Remove previously installed domed nut from
retaining screw holding central mirror bushing
in place.
7. Install flat washer and reinstall domed nut.
TORQUE
M6 cap nut
6 N•m (53 lbf•
in
)
8. Remove clamp pliers.
tsi2012-006-002_a
1. Central mirror collar
2. Cap nut
3. Flat washer
4. Central mirror bushing
9. Loosen screw on central mirror to remove
metal bushing.
tsi2012-006-007_a
LOOSENING SCREW TO REMOVE THE METAL BUSHING
10. Slide central mirror onto central mirror bush-
ing.
11. Torque screw to specification.
TORQUE
Central mirror retaining
screw
2.5 N•m (22 lbf•
in
)
tsi2012-006-003_a
INSTALLING THE MIRROR
Sport Visor (LTD Models)
REQUIRED PARTS
QTY
Sport visor
1
Sport visor installation kit
(from predelivery box #1)
1
1. Place sport visor upside down on a non abrasive
surface.
24 / 54
2014-2
PREDELIVERY
