PARTS TO BE INSTALLED
tbl2012-003-016_a
TYPICAL
16. Close the cargo box.
Front Shock Absorber
1. Block rear wheels.
2. Loosen wheel lug nuts.
3. Lift the front of vehicle and support it securely.
3.1 Insert the jack under the vehicle by the
side, behind front wheels.
3.2 Place the jack under the central beam.
3.3 Lift the front of vehicle.
4. Remove front wheels.
NOTE:
Wheels removal is not necessary but al-
lows more room.
5. Remove the suspension brackets.
Discard
bolts and nuts.
6. Install shock absorbers.
All except LTD
NOTE:
Make sure to position nuts rearward.
PDI KIT PARTS
QTY
M10 x 55 hexagonal flange bolts
4
M10 elastic flange nuts
4
tbl2011-001-041
STD, DPS AND XT MODELS
NOTE:
On
XT-P model
, place the reservoir out-
wards.
tbl2011-001-070_a
XT-P MODELS — LH SIDE OF THE VEHICLE
1. Reservoir facing outside
2. Low speed compression adjuster facing rearward
PARTS
TORQUE
Shock absorber nuts
48 N•m (35 lbf•ft)
LTD Models
7. Install the front shock absorbers.
7.1 Install shock absorbers with the reservoir
outwards.
7.2 Secure shock absorbers using the follow-
ing fasteners.
PDI KIT PARTS
QTY
M10 x 55 hexagonal
flange bolts
2
M10 elastic flange nuts
2
TIGHTENING TORQUE
Shock absorber
nuts
48 N•m (35 lbf•ft)
7.3 Route the hoses in front of the shock ab-
sorbers.
18 / 54
2014-2
PREDELIVERY
