ADJUSTMENTS
REAR SUSPENSION FACTORY SETTINGS
ADJUSTMENT
MODEL
FACTORY SETTING
Base
DPS
XT
Cam position 1 (soft)
XT-P
Spring length 362 mm (14.3 in)
Spring preload
LTD
Not adjustable
XT-P
12 positions
Compression damping
(low speed)
LTD
10 positions
Compression damping
(high speed)
XT-P
12 positions
Rebound damping
XT-P
12 positions
Spring Preload Adjustment
(Front and Rear)
All except LTD
Shorten the spring for a firmer ride and rough rid-
ing condition or when pulling a trailer.
Lengthen the spring for a softer ride and smooth
riding condition.
WARNING
The left and right shock adjustment on front
or rear suspension must always be set to the
same position. Never adjust one shock only.
Uneven adjustment can cause poor handling
and loss of stability, which could lead to an
accident.
Lift the vehicle. Spring length should be mea-
sured without load on the wheels.
All except XT-P Models
Adjust by turning adjusting cam. Use tool from ve-
hicle tool kit.
tmo2011-001-065_a
TYPICAL
1. Turn adjusting cams
2. Smooth adjustment
3. Hard adjustment
XT-P Models
Adjust by loosening lock ring and turning adjuster
ring accordingly. Use tool from vehicle tool kit.
tmo2011-001-059_a
TYPICAL - SPRING NOT SHOWN
1. Loosen top lock ring
2. Turn adjuster ring accordingly
42 / 54
2014-2
PREDELIVERY
