PARTS TO BE INSTALLED
7.4 Connect the shock absorber hoses to ve-
hicle air supply hoses.
tmr2012-005-043_a
TYPICAL – RH SIDE SHOWN
1. Shock absorber hose
2. Vehicle air supply hose
TIGHTENING TORQUE
Air supply hose
6 N•m (53 lbf•
in
)
7.5 Secure shock absorber hoses to brake
hoses using locking ties.
PDI KIT PARTS
QTY
Locking ties
2
tbl2012-003-117_a
TYPICAL – RH SIDE SHOWN
1. Brake hose retaining clamp
2. Locking tie
All Models
8. Clean brake disc. Use the
XPS BRAKES AND
PARTS CLEANER (USA) (P/N 219 701 705)
and a
clean rag.
NOTICE
A thin layer of anticorrosion product
can be present on the brake disc and must be
removed before using the vehicle. Not con-
forming to this procedure may lead to a brake
chattering and the brake pads replacement
would be necessary to solve the problem.
9. Install wheels.
10. Lower the vehicle.
11. Tighten wheel lug nuts as per the following
sequence.
PARTS
TORQUE
Wheel lug nuts
100 N•m (74 lbf•ft)
tbl2012-003-016_a
TYPICAL
Cage Installation
1. Assemble the cage.
PDI KIT PARTS
QTY
M10 x 30 Torx screws(P/N 250 000 624)
4
M10 nut
4
NOTE:
DO NOT TIGHTEN
screws until installa-
tion is completed.
2. On
XT-P model
, install the Can-Am decal on
the front tube of cage.
2.1 Clean the right portion of the front tube.
2.2 Install the decal.
DECAL POSITION
100 mm (4 in) from right tube
PREDELIVERY
2014-2
19 / 54
