PARTS TO BE INSTALLED
tbl2011-001-046_a
TYPICAL — RH REAR CAGE ATTACHMENT POINT
1. M10 x 30 Torx screws
9. Tighten all cage screws.
– Front attachment points
– Rear attachment points
– Joints between front and rear portion of
cage.
PARTS
TORQUE
M10 x 30 Torx screws
65 N•m to 70 N•m
(48 lbf•ft to 52 lbf•ft)
10. Secure rear lateral panels using
NEW
push
nuts (from PDI kit).
tbl2011-001-047_a
TYPICAL
1. Push nuts
All except LTD
11. Install support plates to retain the top of the
rear lateral panels. Make sure to install square
foam behind support plate.
tbl2014-003-004_a
TYPICAL
1. Foam
PARTS
TORQUE
K50 x 16 Torx screws
(previously removed)
Hand torque only
tbl2014-003-003_a
LH SIDE OF VEHICLE SHOWN
1. Support plate
LTD Models
Do not install support plates now. They will be re-
moved to connect rear speakers.
Seat Belt Installation
(All except CE Models)
1. Cut locking tie attaching seat belt.
2. Secure the seat belt to cage post.
PDI KIT PARTS
QTY
7/16-20 x 1 shoulder bolts
2
7/16-20 elastic nuts
2
Nylon flat washers
4
NOTICE
Make sure belt is not twisted.
PREDELIVERY
2014-2
21 / 54
