Brother DCP-L8400CDN, Руководство по обслуживанию

Страница: 411 / 515

5-27
Confidential
■
Detail description
Auto FF Switching of the auto form
feed
On/Off Off
Auto FF Time Switching of the time-out
period of the auto form feed
1 to 99 (seconds) 5
(seconds)
FF Surpress Switching of the FF
Suppress
On/Off Off
Auto LF Switching of the auto LF On/Off Off
Auto CR Switching of the auto CR On/Off Off
Auto WRAP Switching of the auto CRLF
at the print width
On/Off Off
Auto Skip Switching of the Skip at the
backend/tip of the paper
On/Off On
Left Margin Switching of the margin at
the left end
0 to 145 (columus) 0 (columu)
Right Margin Switching of the margin at
the right end
10 to 155 (columus) 80
(columus)
Top Margin Switching of the margin at
the upper end
0 to 2.00 (inches) 0.5
(inches)
Bottom Margin Switching of the margin at
the bottom end
0 to 2.00 (inches) 0.5
(inches)
Lines Number of the text lines in
the page
5 to 128 (lines) 60 (lines)
Error Print Switching of the ErrorPrint of
the PostScript
On/Off On
LCD Detail description
Manual Feed Effective for the print from the computer, or for the print of the
NetWorkConfig/TestPrint/FontList/Configuration from the panel.
When select the tray on the computer, the setting becomes
effective. And this setting is ignored.
Resolution Effective only for the print from the computer. When set the
Resolution on the computer, the setting becomes effective. And this
setting is ignored.
Toner Save Effective for all print, and change the setting of the Function Menu.
However, as for the Copy, this setting becomes invalid. When set
the Toner Save on the computer, the setting becomes effective.
And this setting is ignored.
Density Effective for the print from the computer, or for the print of the
NetWorkConfig/TestPrint/FontList/Configuration from the panel.
Link the setting of the Toner Save. Judge the both setting, and
decide the density. When set the Density on the computer, the
setting becomes effective. And this setting is ignored.
Job Cancel Time out Configure the setting for the time until the host time-out at the Job
Cancel. The setting value is the second time scale.
Sleep Time Configure the setting for the time until shift to the Sleep Time.
Change the setting of the Function Menu.
LCD Detail description Set value
Initial
value